Panowie, z tego co mi wiadomo, opcja Comfort Start jest dostepna tylko w polaczeniu ze skrzynia automatyczna. W autach z manualem jej nie ma. Nie wiem jak jest w E38 ale w E39 540iA bylo kazdej, chyba, ze ktos sobie swiadomie wylaczyl (rozkodowal).

Funkcja Code moze nie dzialac, jezeli jest jakis problem z komunikacja pomiedzy EWS i modulem komputera pokladowego (chodzi o wyswietlacz + radio, nie o ECU), bo to EWS realizuje odciecie zaplonu tak na logike :)

PS. Na potwierdzenie mych slow (sorry, ze w language ale nie chce mi sie tlumaczyc ;) ):

The automatic start function serves to improve driver comfort during the starting procedure. In order to start the engine, it is only necessary to turn the ignition key into the 'start' position for a short time (terminal 50). After the DME control unit has received the input signal from terminal 50, the starter motor is activated until the engine starts up. All E38 vehicles with M73 engine are already equipped with this function.
Now all E38 and E39 vehicles with M62 engine are equipped with the automatic start function in conjunction with the special option automatic transmission.
Function
The starter relay is no longer activated directly via terminal 50 with the automatic start function. Terminal 50 now only serves as an input signal for the DME 5.2.
When the DME 5.2 control unit receives the incoming start signal (terminal 50) and the EWS control unit detects the correct change code at the same time, the DME activates the starter relay via the 'automatic start' output. The prerequisite for this is that the gear selector lever is in 'P' or 'N' position.
The starter motor is activated by the starter relay until 'engine running' is detected by the crankshaft sensor.
'Engine running' is detected when the engine speed
nMot> 920 rpm when the engine is cold or
nMot> 680 rpm when the engine is at operating temperature
is temporarily exceeded during the starting procedure.
On detecting the 'engine running' signal, the DME control unit switches off the starter relay. If starting the engine is unsuccessful, the automatic start procedure is terminated after 20 sec by a ground signal output by the DME.