Procedura adaptacji skrzyni ZF6HP19/21 po resecie adaptacji
Może komu¶ się przyda, dokładny opis jazd adaptacyjnych w naszych autach, po skasowaniu adaptacji:
1. Step 1 Adaptation Re-Learn Procedure (D-Mode)
1) From a standstill, accelerate the vehicle in D Mode with very light throttle (15-25% if monitoring pedal angle with MHD) to 4th gear
2) Continue to accelerate with light throttle (20-40%) to 6th gear
3) Let the vehicle coast to ~25mph, then slow the vehicle to a standstill with light brake
application
4) With the brakes applied and the vehicle at a standstill, wait for 10 seconds
5) Repeat steps 1-4 for 9 cycles, then proceed to Step 2 below (M-Mode)
2. Step 2 Adaptation Re-Learn Procedure (M-Mode)
1) With the shifter in M Mode, accelerate the vehicle to ~30mph and select 3rd gear
2) Continue driving for 2 miles
3) Accelerate the vehicle to ~45mph and select 5th gear
4) Using light throttle, accelerate to 50mph and then coast to ~40mph without applying the
brakes, repeat for 4 cycles, then
5) Accelerate to 55mph and select 6th gear
6) With light throttle, accelerate to 65mph then coast to 50mph without applying the brakes,
repeat for 4 cycles, then
7) Select 3rd gear and repeat steps 1-6 for 5 cycles, then coast to a standstill and proceed to
Step 3 below
3. Step 3 (Shift Confirmation)
1. With the vehicle at a standstill, shift from “N” to “D”, wait 5 seconds then shift back into “N”
2. Repeat this for 4 cycles, then
3. Shift from “N” to “R”, wait 5 seconds then shift back into “N”
4. Repeat this for 4 cycles, then
5. Check error memory to ensure there are no codes
This concludes the basic procedure for re-learning the transmission adaptations. Please keep in mind that the transmission will continue to learn over the next few days to completely learn itself into the new parameters and shift quality will continue to improve. Drive the vehicle as normal.
